Our reputation for supplying high quality aerospace products internationally has endured for over 85 years, and continues today.
| Process Approval | Nomenclature |
| A2ERD-GEN-018-1B | WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NONINSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION |
| A2PS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
| A2PS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS |
| A2PS 138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
| A2PS 145-002 | ELECTRICAL BONDING OF AIRCRAFT |
| A2PS 157-026 | SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING |
| A2PS 157-027 | INTEGRAL FUEL TANK SEALING |
| A2PS 160-020 | CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| A2PS 160-040 | CONDUCTIVE CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS T |
| A2PS 168-007 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| A2PS 168-013 | HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS |
| A2PS 176-002 | FLUORESCENT PENETRANT INSPECTION |
| A2PS 180-001 | ALKALINE CLEANING |
| A2PS 180-015 | PASSIVATION OF CORROSION RESISTANT STEEL |
| A2PS 180-032 | ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS |
| A2PS 151-001 | INSTALLATION OF CONVENTIONAL RIVETS |
View Boeing D1-4426 Approved Processor - BE10047888
| Process Approval | Nomenclature |
| QUALITY SYSTEM | BOEING APPROVED QMS AS DEFINED IN D1-4426 PROCESSOR REQUIREMENTS SEC 6.16.2 |
| BAC 5602 | HEAT TREAT OF ALUMINUM ALLOYS |
| BAC 5019 | CHROMIC ACID ANODIZING - CLASS 5 |
| BAC 5719 | CHEMICAL CONVERSION COATINGS FOR ALUMINUM (IMMERSION APPLICATION ONLY) |
| BAC 5665 | APPLICATION OF SOL-GEL CONVERSION COATINGS ON CORROSION RESISTANT ALLOYS FOR PAINTING (APPROVAL REQUIRED FOR SPRAY, MANUAL AND IMMERSION APPLICATION EXCLUDING TOUCH UP DUE TO POST APPLICATION OPERATIONS) |
| BAC 5423 | PENETRANT INSPECTION |
| BSS 7039 | LIQUID PENETRANT INSPECTION |
| ASTM-E-1417 | PENETRANT INSPECTION |
| BAC 5514 | METAL TO METAL (MM) STRUCTURAL BONDING CLASS 1 PER D-16925 (QPL) |
| BAC 5514 | HONEYCOMB (HC) -CLASSES 3, 4, OR 5 PER D-16925 (QPL) |
| BAC 5555 | PHOSPHORIC ACID ANODIZE (QPL) |
| BAC 5317 | FIBER REINFORCED COMPOSITE PARTS (QPL) |
| BAC 5317-2 | MANUFACTURING OF LOW TEMPERATURE AUTOCLAVE CURE EPOXY STRUCTURAL PARTS (QPL) |
| BAC 5946 | TEMPER INSPECTION OF NON-FERROUS ALLOYS (CONDUCTIVITY METHOD INCLUDING BAC 5651) |
| BAC 5650 | HARDNESS TESTING |
| CHEM. TESTING | PROCESS SOLUTION CONTROL |
| ASTM-B-117 | SALT SPRAY TESTING |
| Process Approval | Nomenclature |
| BAERD-GEN-018-1B | WET CHEMISTRY - TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC - VOLUMETRIC - COLORMETRIC OR TITRATION |
| BAPS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
| BAPS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS |
| BAPS 138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
| BAPS 145-002 | ELECTRICAL BONDING OF AIRCRAFT |
| BAPS 151-001 | INSTALLATION OF CONVENTIONAL RIVETS |
| BAPS 157-026 | SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING |
| BAPS 157-027 | INTEGRAL FUEL TANK SEALING |
| BAPS 160-020 | CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| BAPS 160-040 | CONDUCTIVE CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| BAPS 168-007 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| BAPS 168-013 | HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS |
| BAPS 176-002 | FLUORESCENT PENETRANT INSPECTION |
| BAPS 180-001 | ALKALINE CLEANING |
| BAPS 180-015 | PASSIVATION OF CORROSION RESISTANT STEEL |
| BAPS 180-032 | ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS |
| CAPTIVE LABORATORY | CAPTIVE LABORATORY |
| PPS 01.02 | FORMING ALUMINUM ALLOYS |
| PPS 01.03 | HOT JOGGLING OF ALUMINUM ALLOYS |
| PPS 02.64 | INSTALLATION OF POTTING TYPE SANDWICH PANEL FASTENERS |
| PPS 09.06 | ELETRICAL BONDING AND GROUDING OF AIRCRAFT STRUCTURES |
| PPS 10.12 | POTTING OF A/C PARTS & ASSEMBLIES |
| PPS 10.15 | WET LAY-UP FABRICATION OF EPOXY RESIN/GLASS FABRIC REINFORCED LAMINATES |
| PPS 10.21 | CERTIFICATION OF AUTOCLAVES |
| PPS 10.22 | PREPARATION OF MOLDS |
| PPS 10.23 | STORAGE - HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS |
| PPS 10.24 | PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES |
| PPS 10.25 | STORAGE & APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES |
| PPS 10.28 | ASSEMBLY OF WIRE THERMOCOUPLES |
| PPS 10.35 | FABRICATION OF 250 F CURE - EPOXY RESIN PRE-IMPREGNATED - FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.39 | MACHINING OF FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.40 | REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS |
| PPS 10.43 | FABRICATION OF 350F CURE - EPOXY RESIN PRE-IMPREGNATED - FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.52 | CERTIFICATION OF PLATEN PRESSES |
| PPS 12.04 | INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN |
| PPS 20.03 | PENETRANT FLAW DETECTION |
| PPS 20.07 | CONDUCTIVITY TESTING |
| PPS 20.08 | HARDNESS TESTING |
| PPS 21.03 | PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS |
| PPS 21.20 | MIXING AND HANDLING TWO PART SEALANTS |
| PPS 21.21 | GENERAL SEALING PRACTICES |
| PPS 25.14 | GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE |
| PPS 25.23 | EC-1300 ADHESIVE |
| PPS 25.30 | BONDING USING DHMS A6.09 EPOXY ADHESIVE |
| PPS 25.52 | EC-2216 B/A GREY ADHESIVE |
| PPS 30.01 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| PPS 30.03 | HEAT TREATMENT AND CONTROL OF 2024 (DD) RIVETS |
| PPS 30.08 | STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL |
| PPS 31.02 | CLEANING PROCESSES OF ALUMINUM |
| PPS 31.03 | PRE CLEANING OF STEELS |
| PPS 31.05 | SURFACE TREATMENTS OF CORROSION RESISTANT STEELS |
| PPS 31.07 | CLEANING AND STRIPPING OF PAINTED SURFACES |
| PPS 32.01 | CROMATE CONVERSION COATING |
| PPS 32.03 | CHROMIC ACID ANODIZING (A1) |
| PPS 34.03 | APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) |
| PPS 34.08 | EPOXY PRIME |
| PPS 34.19 | APPLICATION OF F14 ANTI-STATIC COATING |
| PPS 34.34 | SURFACE FINISHING COMPOUNDS (F33) |
| PPS 34.41 | APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) |
| PPS 36.07 | METAL TO METAL & METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING DHMS A6.03 ADHESIVE FILM &PRIM |
| PPS 36.10 | METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 |
| Process Approval | Nomenclature |
| BAERD-GEN-018-1B | WET CHEMISTRY - TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC - VOLUMETRIC - COLORMETRIC OR TITRATION |
| BAPS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
| BAPS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS |
| BAPS 138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
| BAPS 145-002 | ELECTRICAL BONDING OF AIRCRAFT |
| BAPS 151-001 | INSTALLATION OF CONVENTIONAL RIVETS |
| BAPS 157-026 | SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING |
| BAPS 157-027 | INTEGRAL FUEL TANK SEALING |
| BAPS 160-020 | CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| BAPS 160-040 | CONDUCTIVE CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| BAPS 168-007 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| BAPS 168-013 | HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS |
| BAPS 176-002 | FLUORESCENT PENETRANT INSPECTION |
| BAPS 180-001 | ALKALINE CLEANING |
| BAPS 180-015 | PASSIVATION OF CORROSION RESISTANT STEEL |
| BAPS 180-032 | ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS |
| Process Approval | Nomenclature |
| PPS 01.02 | FORMING ALUMINUM ALLOYS |
| PPS 01.03 | HOT JOGGLING OF ALUMINUM ALLOYS |
| PPS 02.64 | INSTALLATION OF POTTING TYPE SANDWICH PANEL FASTENERS |
| PPS 09.06 | ELECTRICAL BONDING AND GROUNDING OF AIRCRAFT STRUCTURES |
| PPS 10.12 | POTTING OF A/C PARTS & ASSEMBLIES |
| PPS 10.15 | WET LAY-UP FABRICATION OF EPOXY RESIN/GLASS FABRIC REINFORCED LAMINATES |
| PPS 10.21 | CERTIFICATION OF AUTOCLAVES |
| PPS 10.22 | PREPARATION OF MOLDS |
| PPS 10.23 | STORAGE - HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS |
| PPS 10.24 | PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES |
| PPS 10.25 | STORAGE & APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES |
| PPS 10.28 | ASSEMBLY OF WIRE THERMOCOUPLES |
| PPS 10.35 | FABRICATION OF 250 F CURE - EPOXY RESIN PRE-IMPREGNATED - FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.39 | MACHINING OF FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.40 | REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS |
| PPS 10.43 | FABRICATION OF 350F CURE - EPOXY RESIN PRE-IMPREGNATED - FIBRE REINFORCED COMPOSITE PARTS |
| PPS 10.52 | CERTIFICATION OF PLATEN PRESSES |
| PPS 12.04 | INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN |
| PPS 20.03 | PENETRANT FLAW DETECTION |
| PPS 20.07 | CONDUCTIVITY TESTING |
| PPS 20.08 | HARDNESS TESTING |
| PPS 21.03 | PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS |
| PPS 21.20 | MIXING AND HANDLING TWO PART SEALANTS |
| PPS 21.21 | GENERAL SEALING PRACTICES |
| PPS 25.14 | GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE |
| PPS 25.23 | EC-1300 ADHESIVE |
| PPS 25.30 | BONDING USING DHMS A6.09 EPOXY ADHESIVE |
| PPS 25.52 | EC-2216 B/A GREY ADHESIVE |
| PPS 30.01 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| PPS 30.03 | HEAT TREATMENT AND CONTROL OF 2024 (DD) RIVETS |
| PPS 30.08 | STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL |
| PPS 31.02 | CLEANING PROCESSES OF ALUMINUM |
| PPS 31.03 | PRE CLEANING OF STEELS |
| PPS 31.05 | SURFACE TREATMENTS OF CORROSION RESISTANT STEELS |
| PPS 31.07 | CLEANING AND STRIPPING OF PAINTED SURFACES |
| PPS 32.01 | CROMATE CONVERSION COATING |
| PPS 32.03 | CHROMIC ACID ANODIZING (A1) |
| PPS 34.03 | APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) |
| PPS 34.08 | EPOXY PRIME |
| PPS 34.19 | APPLICATION OF F14 ANTI-STATIC COATING |
| PPS 34.34 | SURFACE FINISHING COMPOUNDS (F33) |
| PPS 34.41 | APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) |
| PPS 36.07 | METAL TO METAL & METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING DHMS A6.03 ADHESIVE FILM &PRIM |
| PPS 36.10 | METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 |
| Process Approval | Nomenclature |
| GAMPS 6203 | ANODIC COATING OF ALUMINUM AND ITS ALLOYS, HARD COAT, SEALED |
| GAMPS 6201 | ANODIC COATING, CHROMIC ACID, OR ALUMINUM & ITS ALLOYS |
| GAMPS 6204 | PHOSPHORIC ACID ANODIZING OIF ALUMINUM ALLOYS PRIOR TO STRUCTURAL BONDING (METHOD 2) |
| GAMPS 6113 | CHEMICAL FILM, CHROMATE CONVERSION COATING, LOW ELECTRICAL RESISTANCE |
| GAMPS 4103 | PASSIVATION OF CORROSION & HEAT RESISTING ALLOYS |
| GAMPS 4108 | ALKALINE CLANING OF FERROUS AND NON-FERROUS ALLOYS (NOT TITANIUM AND ITS ALLOYS) |
| GAMPS 3116 & GMS 5005 | PRIMER |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, UNTINTED WHITE GAC 3013 |
| AMS-C-27725 | COATING OF INTEGRAL FUAL CELLS, ANTI-CORROSION FUEL RESISTANT |
| GAMPS 3102 | COATING, CORROSION PREVENTIVE, AIRCRAFT INTEGRAL FUAL TANKS |
| GAMPS 3103 & GMS 5001 | COATING, EPOXY PRIMER, APPLICATION OF (2 COATS) FILL & DRAIN |
| GAMPS 8112 | APPLICATION OF BOND PRIMER - BR127 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, AIRCRAFT GRAY 16473 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, INSIGNIA RED 11136 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, BLACK 17038 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, CLEAR |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, ORANGE-YELLOW 13538 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, SEMI-GLOSS, BLACK 27038 |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, INTERNATIONAL ORANGE 12197 |
| GAMPS 3219 | TOUCH UP FASTENER ENDS TO MATCH THE PAINT TYPE OF THE SURROUNDING STRUCTURE, PROCESS I |
| GAMPS 3219 | OVERCOAT FASTENER ENDS WITH FINISH CODE 144 FUAL TANK COATING, PROCESS II |
| GAMPS 3103 & GMS 5002 | PRIMER, EPOXY, SKYDROL RESISTANT, GREEN |
| GAMPS 3216 & GMS 5006 | TOPCOAT, EPOXY, GLOSS, UNTINTED WHITE GAC 3013 |
| GAMPS 1105 | NON-PERMANENT MARKING OF METALLIC PARTS & ASSEMBLIES |
| GAMPS 1105 | PERMANENT MARKING OF FABRICATED METALLIC PARTS, CL 1A-VIBRATORY ENGRAVING |
| GAMPS 1105 | PERMANENT MARKING OF FABRICATED METALLIC PARTS, CL 1B-METAL IMPRESSION STAMPS |
| GAMPS 1105 | PERMANENT MARKING OF FABRICATED METALLIC PARTS, CL 1D ACID ETCHING INK |
| GAMPS 1105 | NON-PERMANENT MARKING OF METALLIC PARTS CL 2D-METALLIC TAGS |
| GAMPS 2403 | FABRICATION OF STRUCTURAL LAMINATES, GLASS FIBER, EPOXY |
| GAMPS 2407 | REQUIREMENTS FOR GLASS FIBER SANDWICH CONSTRUCTION |
| GAMPS 8109 | BONDING, STRUCTURAL, ADHESIVE, FOR ALUMINUM HONEYCOMB SANDWICH MATERIAL |
| GAMPS 2420 | FABRICATION OF KEVLAR PRE-INPREGNATED EPOXY RESIN CLOTH LAMINATES IN AUTOCLAVE OR RESIN BAG |
| GAMPS 6305, GAMPS 6311 CL 1 | FABRICATION OF CARBON/EPOXY SOLID LAMINATE STRUCTURES (CLASS 1 ACCEPTANCE CRITERIA) |
| GAMPS 8118 | FABRICATION OF COMPOSITE STRUCTURAL PARTS, CO-CURE & SECONDARY BONDING - 350F AUTOCLAVE CURED |
| GAMPS 8118 | FABRICATION OF COMPOSITE STRUCTURAL PARTS, METHOD 2 |
| GAMPS 8118 | FABRICATION OF COMPOSITE STRUCTURAL PARTS, METHOD 5 |
| GAMPS 2419 | REQUIREMENTS FOR PRE-IMPREGNATED GLASS FIBER EPOXY LAMINATES - VACUUM BAG CURE |
| GAMPS 8121, GMS 4005 | POTTING PROCESS, SANDWICH STRUCTURE, EDGE FILL AND PRE-BOND, TYPE 1, CLASS A, LOW DENSITY POTTING |
| GAMPS 8124, GMS 4315 | APPLICATION OF ADHESIVE PRIMER FOR STRUCTURAL BONDING TYPE 1, PRODUCT A |
| GAMPS 8125, GMS 4301 | FILM ADHESIVE, STRUCTURAL OF METAL & THERMOSET PLASTIC TY I CL II PRODUCT B |
| GAMPS 8310 | STANDARD MACHININGM DRILLING, & TRIMMING PRACTICES FOR COMPOSITE MATERIALS |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 8 |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 3A |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 6 |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 4 |
| GAMPS 8210 | BONDING, ADHESIVE EPOXY, OF METALLICS AND NON-METALLICS GRP B TY 2 |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 5 |
| GAMPS 8210 | BONDING , RUBBER BASE ADHESIVE OF METALLICS AND NON-METALLICS GRP A, TY 2 |
| GAMPS 8210 | BONDING , RUBBER BASE ADHESIVE OF METALLICS AND NON-METALLICS GRP A, TY 1 |
| GAMPS 8210 | BONDING , RUBBER BASE, OF METALLICS AND NON-METALLICS, NON-STRUCTURAL |
| GAMPS 8210 | BONDING , RUBBER BASE ADHESIVE OF METALLICS AND NON-METALLICS GRP A, TY 3 |
| GAMPS 8210 | BONDING , RUBBER BASE ADHESIVE OF METALLICS AND NON-METALLICS GRP A, TY 4 |
| GAMPS 8210 | BONDING OF METALLICS & NON-METALLICS, SILICONE ADHESIVE GRP C TY 3 |
| GAMPS 8210 | BONDING, RUBBER BASE ADHESIVE OF METALLICS AND NON-METALLICS GRP A TY 5 |
| GAMPS 8210, GAA100AU | BONDING, RUBBER BASE ADHESIVE, OF METALLICS & NON-METALLICS GRP A TY 6 |
| GAMPS 8210 | BONDING, ADHESIVE EPOXY OF METALLICS & NON-METALLICS GRP B TY 1 |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE OF METALLICS & NON-METALLICS GRP C TY 2 |
| GAMPS 8210, GAA100VA1 | BONDING, ADHESIVE EPOXY, OF METALLICS & NON-METALLICS, GRP B TY 6 |
| GAMPS 8210, GAA100BD13 | BONDING, ADHESIVE EPOXY, OF METALLICS & NON-METALLICS, GRP B TY 6 |
| GAMPS 8210 | BONDING, ADHESIVE EPOXY, OF METALLICS & NON-METALLICS, GRP B TY 3 |
| GAMPS 8210 | BONDING, SILICONE ADHESIVE, OF METALLICS & NON-METALLICS GRP C TY 1 |
| GAMPS 8110 | BONDING, ADHESIVE, OF STRUCTURAL METALLIC PARTS |
| GAMPS 6112, GMS 4301 | BONDING, STRUCTURAL ADHESIVE, SUPPORTED, MEDIUM FILM WEIGHT, TY I CL II, PRODUCT A, B, C, OR D |
| GAMPS 5108 | HEAT TREAT OF ALUMINUM ALLOY 7075 TO T73, T7351, T7352, & T73511 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T42 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY 7475 TO T761 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T62 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T73 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T76 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T81 |
| GAMPS 5108 | HEAT TREATMENT OF ALUMINUM ALLOY TO T87 |
| GAMPS 5108 | HEAT TREATING & STRETCH PRESS RELIEVING OF ALUMINUM ALLOY 7075 THIN GAUGE EXTRUSIONS (<0.062") TO T732 |
| GAMPS 5108 | HEAT TREATING OF ALUMINUM ALLOY 7475 TO T761 |
| ASTM E 1417, MIL-STD-1907 GR A | INSPECTION BY PENETRANT GR A TYPE 1 METHOD ANY SENSITIVITY LEVEL 3 OR HIGHER DEVELOPERS FORM A OR D SOLVENT REMOVER CLASS 2 |
| ASTM E 1417, MIL-STD-1907 GR B | INSPECTION BY PENETRANT GR B TYPE 1 METHOD ANY SENSITIVITY LEVEL 3 OR HIGHER DEVELOPERS FORM A OR D SOLVENT REMOVER CLASS 2 |
| ASTM E 1417, MIL-STD-1907 GR C | INSPECTION BY PENETRANT GR C TYPE 1 METHOD ANY SENSITIVITY LEVEL 3 OR HIGHER DEVELOPERS FORM A OR D SOLVENT REMOVER CLASS 2 |
| ASTM E 1417, MIL-STD-1907 GR D | INSPECTION BY PENETRANT GR D TYPE 1 METHOD ANY SENSITIVITY LEVEL 3 OR HIGHER DEVELOPERS FORM A OR D SOLVENT REMOVER CLASS 2 |
| GAMPS 4101 | SURFACE PREPARATION, ABRASIVE METHOD FOR |
| GAMPS 1106 | NON-PERMANENT MARKING OF FABRICATED NON-METALLIC PARTS CL 2B STENCILS |
| GAMPS 3210 | PROTECTING AND HANDLING OF MATERIALS AND PARTS |
| GAMPS 2109 | STANDARD MACHINING PRACTICE FOR & CONTROL OF MACHINED PARTS IN GAC AIRCRAFT |
| GAMPS 2101 | FABRICATION OF ALUMINUM ALLOYS |
| GAT16A | GENERAL SPECIFICATION FOR THREADS, SCREW, ROLLED |
| GAMPS 2101 | STRAIN LIMIT CONTROL STRETCH FORMING |
| GAB 14E | INSTALLATION OF BEARINGS, SPHERICAL, SWAGE-RETAINED TYPE |
| GAMPS 2226 | SHRINK FIT INSTALLATION OF BUSHINGS |
| GA 411 | BEARING INSTALLATION & RETENTION BY SWAGING OR STAKING |
| GAMPS 2114 | SHIMMING USING METALLIC AND/OR LIQUID SHIMS. PERMISSIBLE TO USE CAST PLASTIC (LIQUID) SHIMS UP TO 0.010" THICK |
| GAMPS 2114 | SHIMMING USING METALLIC SHIMS |
| GAMPS 2202 | INSTALLATION OF ALLOY RIVETS, SOLID & TUBULAR |
| GAMPS 2203 | iNSTALLATION OF BLIND RIVETS |
| GAMPS 2214 | SWAGING, REDUCING, EXPANDING, FOR TRUSS TUBES, PUSH RODS OF ALUMINUM & STEEL ALLOY STRUCTURAL TUBING |
| GAMPS 2221 | HOLE PREPARATION FOR & INSTALLATION OF FASTENER INSERTS INTO HONEYCOMB BONDED ASSEMBLIES |
| GAMPS 2221, GMS 4005 TY 1, CL A | HOLE PREPARATION FOR & INSTALLATION OF POTTED FASTENER INSERTS INTO ALUMINUM HONEYCOMB BONDED ASSEMBLIES USING LOW DENSITY POTTING COMPOUND |
| GAMPS 2222 | INSTALLATION OF MECHANICAL FASTENERS IN NON-METALLIC MATERIALS |
| GAMPS 2605, GAB 17G | PREPARATION OF SURFACES FOR ELECTRICAL BONDING |
| GAMPS 2605 | BONDING, ELECTRICAL FOR LIGHTNING PROTECTION |
| Process Approval | Nomenclature |
| VPS 1.01 | DIMPLING ALUMINUM ALLOYS |
| VPS 1.02 | FORMING ALUMINUM ALLOYS |
| VPS 1.03 | HOT JOGGLING ALUMINUM ALLOYS |
| VPS 1.04 | MODIFIED RADIUS DIMPLING EQUIPMENT |
| VPS 1.05 | RAM COIN DIMPLING EQUIPMENT |
| VPS 1.09 | DRILLING AND REAMING |
| VPS 1.38 | HOT STRAIGHTENING OF ALUMINUM ALLOYS |
| VPS 2.16 | INSTALLATION OF NAS TYPE LOCKBOLT FASTENERS |
| VPS 2.27 | INSTALLATION OF LEE PLUGS |
| VPS 2.35 | INSTALLATION OF BACB AND BOMBARDIER TYPE TITANIUM LOCKBOLTS |
| VPS 2.36 | COLD EXPANSION OF HOLES |
| VPS 2.64 | INSTALLATION OF POTTING TYPE SANDWICH PANEL FASTENERS |
| VPS 2.67 | INSTALLATION OF HI-LOKHI-TIGUE FASTENERS |
| VPS 2.70 | INSTALLATION OF CLICK BOND ADHESIVE BONDED FASTENERS, TIE MOUNTS AND PATCHES |
| VPS 9.06 | ELECTRICAL BONDING AND GROUNDING OF AIRCRAFT STRUCTURES |
| VPS 9.07 | SOLDERING OF ELECTRICAL TERMINALS |
| VPS 10.04 | WET LAY-UP OF GLASS FABRICPOLYESTER RESIN LAMINATES |
| VPS 10.15 | WET LAY-UP FABRICATION OF EPOXY RESINGLASS FABRIC REINFORCED LAMINATES |
| VPS 10.17 | MACHINING OF PLASTICS |
| VPS 10.21 | CERTIFICATION OF AUTOCLAVES |
| VPS 10.22 | PREPARATION OF MOULDS |
| VPS 10.23 | STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS |
| VPS 10.24 | PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES |
| VPS 10.25 | STORAGE AND APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES |
| VPS 10.26 | PLATEN PRESS CURING OF 250F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS |
| VPS 10.28 | ASSEMBLY OF WIRE THERMOCOUPLES |
| VPS 10.35 | FABRICATION OF 250F CURE EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS |
| VPS 10.39 | MACHINING OF FIBRE REINFORCED COMPOSITE PARTS |
| VPS 10.40 | REPAIRS TO LAMINATES & SANDWICH PANELS |
| VPS 10.43 | FABRICATION OF 350F CURE EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS |
| VPS 10.48 | FABRICATION OF 280F CURE, PHENOLIC RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS |
| VPS 10.51 | CERTIFICATION OF OVENS |
| VPS 10.52 | CERTIFICATION OF PLATEN PRESSES |
| VPS 12.07 | INSTALLATION OF BUSHINGS USING THE FORCEMATE COLD EXPANSION PROCESS |
| VPS 13.23 | PREPARATION & USE OF DHMS P1.30 RESIN |
| VPS 14.01 | TORQUING - METHOD AND IDENTIFICATION |
| VPS 14.04 | INSTALLATION OF PRELOAD INDICATING WASHERS |
| VPS 17.02 | ABRASIVE BLASTING |
| VPS 20.03 | FLUORESCENT PENETRANT INSPECTION |
| VPS 20.07 | ELECTRICAL CONDUCTIVITY TESTING OF ALUMINUM ALLOYS |
| VPS 20.08 | HARDNESS TESTING OF METALS |
| VPS 21.20 | MIXING AND HANDLING TWO-PART SEALANTS |
| VPS 21.21 | GENERAL SEALING PRACTICES |
| VPS 30.01 | HEAT TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS |
| VPS 31.02 | CLEANING PROCESSES FOR ALUMINUM AND ALUMINUM ALLOYS |
| VPS 31.04 | DEGREASING PROCESSES |
| VPS 31.07 | CLEANING AND STRIPPING OF PAINTED SURFACES |
| VPS 31.13 | CLEANING ALUMINUM ALLOYS FOR HIGH STRENGTH ADHESIVE BONDING |
| VPS 32.01 | CHEMICAL CONVERSION COATING OF ALUMINUM AND TITANIUM ALLOYS BY IMMERSION |
| VPS 32.02 | MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS |
| VPS 32.03 | CHROMIC ACID ANODIZING |
| VPS 32.04 | HARD ANODIZING |
| VPS 32.11 | CHROMIC ACID ANODIZING FOR HIGH STRENGTH ADHESIVE BONDING |
| VPS 32.35 | CHEMICAL CONVERSION COATING FOR LOW ELECTRICAL RESISTANCE (C10) |
| VPS 34.03 | APPLICATION OF POLYURETHANE ENAMEL |
| VPS 34.08 | APPLICATION OF EPOXY-POLYAMIDE PRIMER |
| VPS 34.11 | PRIMING AND PAINTING OF AIRCRAFT EXTERIOR SURFACES |
| VPS 34.16 | APPLICATION OF URETHANE COMPATIBLE PRIMER (F23) |
| VPS 34.19 | APPLICATION OF F41 ANTI-STATIC COATING |
| VPS 34.34 | SURFACE FINISHING COMPOUNDS (F33) |
| VPS 34.41 | APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) |
| VPS 36.01 | METAL TO METAL HIGH STRENGTH BONDING USING DHMS A6.16 ADHESIVE SYSTEM FOR DHC-6 AIRCRAFT |
| VPS 36.07 | METAL TO METAL AND METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING VMS A6.03 ADHESIVE FILM AND PRIMER |
| VPS 36.10 | METAL BONDING OF VIKING PARTS TO BAC 5555 AND BAC 5514 |
| VPS 36.22 | REQUIREMENTS FOR METAL TO METAL AND METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING |
| VAERD-GEN-018-1B | ENGINEERING REQUIREMENTS FOR LABORATORIES |
| VAPS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
| VAPS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS |
| VAPS 160-020 | CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| VAPS 168-007 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| VAPS 168-013 | HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING |
| VAPS 176-002 | FLUORESCENT PENETRANT INSPECTION |
| VAPS 180-001 | ALKALINE CLEANING |
| VAPS 180-015 | PASSIVATION OF CORROSION RESISTANT STEEL |
| VAPS 180-032 | ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS |
| VAPS 260-001 | FABRICATION OF 250°F (121°C) CURE COMPOSITE LAMINATES AND SANDWICH COMPONENTS |
| VAPS 138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
| VAPS 145-002 | ELECTRICAL BONDING OF AIRCRAFT |
| VAPS 151-001 | INSTALLATION OF CONVENTIONAL RIVETS |
| VAPS 157-026 | SPRAY APPLICATION OF VAMS 565-010 INTEGRAL FUEL TANK COATING |
| VAPS 157-027 | INTEGRAL FUEL TANK SEALING |
